Why buy when you can DIY?

DIY Urban Outfitters Inspired Wooden Dowel + Leather Chair

By Mandi 07/29/2019

Hellooooooo!! Guys. Good news. We survived the move! Its a little overwhelming to move, travel, celebrate 2 birthdays and stay on top of life. Do you know what sounds so great right now? Just being whelmed. Not overwhelmed, not underwhelmed, just whelmed.

Are you ready to start checking off all of the projects from Aspyn’s house?

My favorite project is the Wooden Dowel chairs. I hunted for months trying to find the perfect pair of chairs that were a little boho, and a lot awesome and just came up short over and over. It was MADDENING! Then I found these chairs at Urban Outfitters. Um. Hello perfection. Also, totally DIYable.(<—-has anyone trademarked that? cause I got dibs!)

 

Looking at the picture its so plainly a handful of dowels that I had to try it. Also I’ve been wanting to buy a drill press and this was the perfect project. (This is the one I got BTW)

To make this project you’ll need:

(2) 1 1/4″ wooden dowels cut to 24″
*these are the front vertical pieces
(2) 1 1/4″ wooden dowels cut to 30 1/2″
*these are the back vertical pieces
(2) 1 1/4″ wooden dowels cut to 23 1/2″
*these are the seat cross pieces
(4) 2″ wooden dowels cut to 24″ 
*these will be the arms and seat pieces
(1) 2″ wooden dowel cut to 26 1/2″
*this is the top piece
(1) 3/4″ wooden dowel cut to 24″
*this is the back leg cross piece

Rope (you’ll need about 40′ per chair)
1/4″ Rope Clamp Set

Drill Press
1 1/4″ Forstner Drill Bit
3/4″ Forstner Drill Bit
Wood Glue
Screws
Drill

The most important thing that you can do to ensure that your project is done right is to build a jig to hold your dowels, that way they won’t rotate and misalign your holes. Now if we’re really being honest, I’m sure that there is a perfectly simple and correct way to create a jig for something like this. I just have no idea what that is. So this is what we came up with.

I spaced 2 pieces of scrap wood out on a larger piece so that the dowel fit snug inside them. Then I marked where the dead center was between the 2 boards. That way I could center the laser on the mark and after it was centered, add the dowel. Because the laser was already centered, I knew that we were drilling into the right spot on the dowel.

Drilling the holes is the hardest part, so in an effort to make it as absolutely easy as possible, I’ve got a few diagrams with measurements for your cute face.

The seat piece is the most complicated of the bunch because you have to rotate the dowel 1/4 turn to drill the second set of holes. The easiest way we found to do this (and keep it accurate) is to drill the holes that go all the way through and then put a dowel in one side (it doesn’t have to be a big one, just something that you can put a level on) rotate the dowel 1/4 turn and use a small level to make sure that its even. Then drill the second set of holes.


Once you’ve got everything assembled to this point you’re just going to connect the cross pieces. Just a heads up, depending on how accurately you drilled the 1/2 holes your measurements may vary just a little. I recommend cutting the cross pieces at 23.5″ and assembling. See if your chair is square, if its not you might need to trim your cross pieces down a little.

If you’re having a hard time getting your dowels into the holes, tape a piece of sandpaper on the end of a drill bit and ream the hole a little to smooth the edges and make it a little bit bigger.

A rubber mallet is kind of your best friend for getting everything lined up without damaging the wood. One you’ve dry fit everything and its looking fab, put wood glue in the joints, and place a few screws in the underside of the joints to secure everything in place.

You’ve got a few options when it comes to creating something that you can actually sit on. The chair from Urban used leather straps but I wanted to change things up a little so I used rope.

I started in the bottom left corner and wrapped it along the seat, then moved on to the back. I ended the rope back where I started and used a few rope clamps to secure it.

It is surprisingly comfortable just with the rope if you’re loving that Aussie/nautical look.

To make the cushions I found a fantastically worn leather couch on Craigslist and skinned it. I used this tutorial for a hidden zipper pillow.

If you make this project I want to see! I’m itching to make a 2 seater bench, wouldn’t that be the cutest?!

24 thoughts on “DIY Urban Outfitters Inspired Wooden Dowel + Leather Chair”

  1. I could kiss you right now! I’ve been searching for a chair like this and they’ve all been very expensive.

    So excited to see your tutorial

  2. Please Please Please do a tutorial for the peg board, I’m dying to make one for my craft room!

  3. I am really awed by your work. You really have outdone this yourself. Good job for you. Keep it up!

  4. wow! that chair is looking so beautiful and that is amazing idea to make a chair with leather. You shared amazing guide to design it. I also try it at my home.Inlay Work

  5. that’s a quote from “10 things I hate about you” hehe… know you cane overwhelmed and you can be underwhelmed but can you ever just be whelmed?”

  6. Have you got somewhere on your site showing the process of skinning a sofa…………and how to sew leather?

    1. Ok, just saw your link re: leather pillow 🙂 But the skinning the couch thing………………do you just cut it with scissors? Where do you get rid of the rest of a deconstructed couch??

  7. I’m obsessed with these chairs and my husband and I are going to try our hand at them! Bc at 650 a pop at UO….just no. Question though…what are the dimensions of your pillows that you made for them? And did you attach them to the rope with any kind of strap?

  8. Wow that’s amazing! Any chance you’d be willing to make and sell one? I’d love to buy off you!

  9. Hi Mandi, could you please tell me where exactly did you put the screws? They are invisible on the pictures, which is great but I am afraid to put them on wrong places. also how much weight it can hold?
    Thank you so much!

Leave a comment!

Keep the conversation going! Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.