Installing a paver patio is a big undertaking. It’s expensive, it’s a lot of physical labor, and it’s semi permanent. All of the ingredients that make up a really intense DIY project right!?
When we decided to install the Pavestone Plank pavers at the Granary, I dove deep into picking the perfect pattern.
One of the reasons that I chose to use the Plank pavers is because I am obsessed with the dimensions. Traditional pavers have a 1:2 dimension ratio, meaning they are twice as long as they are wide. But the plank pavers have a 1:3 ratio, which makes them elongated and a IMHO little more special.
There are 5 iconic ways to install rectangular pavers (or tile, or boards, or whatever rectangular material makes your heart sing) and we’re going to talk through all 5! I mean, you are basically living with this patio for the next 10-60 years, and you dont want to screw it up. (No pressure!)
1/3 Offset Paver Pattern
The 1/3 Offset pattern is made by offsetting each tile’s edge 1/3 of the way across the previous row. Basically if you divide a tile in 3rds, that is where the rows of edges should repeatedly hit.
Straight Stacked Paver Pattern
A Straight Stacked or Straight Lay pattern is made by squarely lining the pavers up row by row. This will give your paver patio a modern vibe.
Herringbone Paver Pattern
Herringbone pavers are usually set at a 45 degree angle and individual pavers alternate the direction they are rotated. Herringbone pavers will give your space a timeless and fun vibe! You can read all about our herringbone paver patio here!
Basket Weave Paver Pattern
A Basket Weave pattern is made when pavers are laid net to each other to form a square. The following pavers are also laid in a square but in the opposite direction. The basket weave pattern pictured above is made out of 3 pavers, because of their 1:3 ratio. You can also make this pattern with 2 or more pavers, just keep in mind that they’ll have to have an even ratio to make a square! This style will give you a cool mid-century vibe, especially if you are using more than 2 pavers per square!
Running Bond Paver Pattern
You see this pattern all over Pinterest, think subway tile! When something is laid in a running bond it means that the center of each tile is lined up with the edge of the tile above and below it. It’s a little less busy that the 1/3 Step and will give you a traditional courtyard feel. This was my second favorite for the Granary!
I’m dying to know, which one do you love the most!? If you use any of these patterns at your house make sure to share pictures, I can’t wait to see it!
